Wall Gel (10Ltr) Protective Barrier

Wall Gel is a protective barrier for structures likely to be contaminated with Colour Hardeners, Antique Release Agents, Concrete, etc.

Apply directly to the surface requiring protection, with a soft brush.

Allow the wall gel to dry prior to application of concrete and colour hardener.

Using a jet wash, remove the wall gel from the surfaces (this is usually done after the concrete has been left to cure, over a few days).

• Wall Gel is a non-hazardous barrier gel when used as intended.
• Avoid skin contact - Wash contaminated area with suitable industrial cleanser or warm water and soap.
• Avoid eye contact - If contaminated, flush with eye wash or warm water for 10 minutes.
• Weight: 10kg