Pattern Imprinted Concrete Sealer - High Gloss (5Ltr)

Multicrete imprinted concrete sealer is a high quality acrylic solvent based clear sealer, designed to enhance and protect imprinted concrete area's by repelling water, dirt, oil and fuel.

Please note all non-palletised orders of this product will be dispatched under limited quantity transport regulations in 5 litre containers.

Benefits

• Ready for use no dilution required.
• Surface dry in 1-2 hours.
• High solids.
• Enhances imprinted concrete drives and patio's with no need for colouring.

Coverage

• 2-4 square meters per litre depending on the substrate, porosity of surface and application method. Some porous or neglected surfaces may require more than a single coat.

Application

• For new surfaces - leave up to 7 days after new concrete is laid. Ensure the surface is clean and dry.
• For old surfaces - fully clean off with power wash. Allow to thoroughly dry prior to application.
• Can be applied by course droplet low level, chemical resistant sprayer, soft bristle brush or roller.
• Avoid excess pooling and over coating.

Limitations

• Do not apply when ground temperatures are below 5 degrees.
• Do not apply to damp or wet surfaces.
• Do not apply when rain is imminent or if efflorescence is present.
• Do not walk on treated area till dry.
• Do not park vehicles on treated area for 24-48 hrs.
• Do not use on clay surfaces.
• Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish.

Details

Weight: 5kg