Pattern Imprinted Concrete Sealer - High Gloss (25Ltr)

2 sold in last 8 hours
Imprinted Concrete Sealants
Select To Include Antislip Additive :
Terms & conditions

Subcribe to back in stock notification

customers are viewing this product
Multicrete imprinted concrete sealer is a high quality acrylic solvent based clear sealer, designed to enhance and protect imprinted concrete area's by repelling water, dirt, oil and fuel.

Please note all non-palletised orders of this product will be dispatched under limited quantity transport regulations in 5 litre containers.


• Ready for use no dilution required.
• Surface dry in 1-2 hours.
• High solids.
• Enhances imprinted concrete drives and patio's with no need for colouring.


• 2-4 square meters per litre depending on the substrate, porosity of surface and application method. Some porous or neglected surfaces may require more than a single coat.


• For new surfaces - leave up to 7 days after new concrete is laid. Ensure the surface is clean and dry.
• For old surfaces - fully clean off with power wash. Allow to thoroughly dry prior to application.
• Can be applied by course droplet low level, chemical resistant sprayer, soft bristle brush or roller.
• Avoid excess pooling and over coating.


• Do not apply when ground temperatures are below 5 degrees.
• Do not apply to damp or wet surfaces.
• Do not apply when rain is imminent or if efflorescence is present.
• Do not walk on treated area till dry.
• Do not park vehicles on treated area for 24-48 hrs.
• Do not use on clay surfaces.
• Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish.


Weight: 25kg
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Pattern Imprinted Concrete Sealer - High Gloss (25Ltr)
You have successfully subscribed!
This email has been registered